Rxcillin Hospital Disinfectant is a powerful broad-spectrum disinfectant designed for use in hospitals and healthcare facilities. Clinically tested and proven to kill bacteria and viruses (including COVID-19), Rxcillin Hospital Disinfectant is registered with the US EPA (#94196-3).
Rxcillin Hospital Disinfectant can be applied to small surface areas using either an electrostatic sprayer or a conventional trigger spray. It can be sprayed directly onto the surface and allowed to dry or sprayed and then wiped onto the surface or item. This unique, fast-acting surface treatment product kills bacteria and viruses on contact and continues to provide protection for extended periods.
PRECAUTIONARY STATEMENTS:
HAZARDS TO HUMANS AND DOMESTIC ANIMALS:
CAUTION: Harmful if swallowed. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet.
Harmful if absorbed through skin. Avoid contact with skin, eyes, or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet. Remove and wash contaminated clothing before reuse. Wear long-sleeved shirts and pants (if applicable). Harmful if inhaled. Avoid breathing vapor or spray mist. Remove and wash contaminated clothing before reuse.
ENVIRONMENTAL HAZARDS:
COMMERCIAL AND INDUSTRIAL USES: This pesticide is toxic to fish. Do not discharge effluent containing this product into lakes, streams, ponds, estuaries, oceans, or other waters unless in accordance with the requirements of a National Pollutant Discharge Elimination System (NPDES) permit, and the permitting authority has been notified in writing prior to discharge. Do not discharge effluent containing this product to sewer systems without previously notifying the local sewage treatment plant authority. For guidance, contact your State Water Board or Regional office of the EPA.
ACTIVE INGREDIENTS:
- Alkyl (C14-50%, C12-40%, C16-10%) Dimethyl Benzyl Ammonium Chloride .4000%
- Octyl Decyl Dimethyl Ammonium Chloride .13000%
- Dioctyl Dimethyl Ammonium Chloride .11200%
- Didecyl Dimethyl Ammonium Chloride .11800%
- Polyhexamethylene biguanide hydrochloride .5000%
- 3-(Trimethoxysilyl) propyldimethyloctadecyl ammonium chloride .7920%
- Other Ingredients 97.7080%
TOTAL 100.0%
STORAGE AND DISPOSAL:
Do not contaminate water, food, or feed by storage and disposal.
Pesticide Storage: Store in original, tightly closed containers below 30°C (86°F) and above 0°C (32°F) in a secure area inaccessible to children and away from food or feed.
Pesticide Disposal: Wastes resulting from the use of this product may be disposed of onsite or at an approved waste disposal facility.
Container Handling (containers less than 5 gallons): Triple rinse container as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinseate into application equipment or a mix tank or store rinseate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling, if available, or puncture and dispose of in a sanitary landfill or by other procedures approved by state and local authorities.
FIRST AID:
IF INHALED: Remove victim immediately from source of exposure. Move person to fresh air. If the person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth, if possible. Call poison control center or doctor for further treatment advice.
IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Have the person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an unconscious person.
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment advice.
IF IN THE EYES: Immediately flush with plenty of water for up to 15 minutes. Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses (if present) after the first 5 minutes, then continue rinsing. Call a doctor for treatment advice.
EMERGENCY CALL INFO: +1 (888) 831-8892, M-F 9AM-5PM (EST)
DIRECTIONS FOR USE:
It is a violation of Federal law to use this product in a manner inconsistent with its labelling.
PUBLIC HEALTH CLAIMS
DIRECTIONS FOR USE ON NON-POROUS HARD SURFACES:
This product is not to be used as a terminal sterilant or high-level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high-level disinfection.
APPLICATION METHOD:
My-shield Hospital Disinfectant, when used as a ready-to-use spray from a distance of 6-8 inches from the surface, is an effective disinfectant with bactericidal and virucidal activity against the following on pre-cleaned hard, non-porous surfaces for a 10-minute contact time:
- Staphylococcus aureus (ATCC 6538)
- Pseudomonas aeruginosa (ATCC 15442)
- Salmonella enterica (ATCC 10708)
- 229E Human Corona Virus (ATCC VR-740)
HARD SURFACE PREPARATION:
Pre-clean surface prior to application of My-shield Hospital Disinfectant. Using a trigger pump or pressure sprayer, spray 6” to 8” from the surface, making sure the surface is completely wet and remains wet for 10 minutes. Reapply if necessary, to ensure surface remains wet for 10 minutes. Let stand until dry or wipe dry after 10 minutes. Remove children and pets from treated area until completely dried.
NON-PUBLIC HEALTH USE
LOCATIONS & CLAIMS ON NON-POROUS HARD SURFACES:
When used as directed, My-shield Hospital Disinfectant will kill and control bacteria and viruses on all non-porous hard surfaces, including Hospitals, Nursing Homes, Health Care, Public Transport, Hotels, Motels, Leisure, Sporting Arenas, Hospitality, Schools, Educational Facilities, Mosques, Gymnasiums, Government, and Military.